Knowledge Centre Blog

A Data Matrix Code is a 2D barcode which care store a large amount of data. Unlike a 1D barcode ...

Pryor has been at the heart of industrial marking since 1849 and is proud to be a part of The Hea...

Dot Peen is a method of permanent marking, usually used on metal. It uses a stylus, or pin, that ...

There is a growing demand for traceability within UK manufacturing. The practice originates from ...

Typical marking lasers come in three types – carbon dioxide (CO2), YAG or Fibre.The most ba...

2017 was the year in which "Industry 4.0" was everywhere. From conferences to exhibitions to arti...

The IAQG is the International Aerospace Quality Group, a body formed by the SAE. It brings togeth...

JES 131 is a Rolls-Royce specification that defines and controls part marking methods and require...

Reset Procedure on Pryor Controllers Detailed below is the procedure on how to conduct resets on...

RRES 90003 is a global engineering specification for Identification Marking Methods and Controls....

UDI Regulations and Requirements A directive from the United States Food and Drug Administration...

AS9132 is a specification for the Direct Part Marking of aerospace components.It is issued by the...