Percussion Impact Presses
-
Pryor Home
›
-
Products
›
- Percussion Impact Presses
Percussion Impact Presses
Pryor supplies a range of manual and pneumatic Percussion Impact Presses. These are ideal for use with a Pryor Auto or Manual Number Marking Head when marking serialisation numbers, with a custom manufactured Flymark or Pryor Steel Type and Press Holder when marking either a fixed or completely changeable inscription.
- Manually Operated Impact Press range
- Pneumatically Operated Impact Press range
- Integrated Pneumatic Impact Press range
Now supplied in Pryor Grey
If you would like to find out more information about this product please complete the enquiry form and a member of our team will get in touch with you.
Overview
Percussion Impact Press Range
Pryor supplies a range of bench mounted and integrator Percussion Presses for use anywhere within the factory. Marking is achieved by compressing and releasing a spring loaded ram which can easily be adjusted to alter the marking force.
Pneumatically powered bench mounted Presses work on the same principles as hand operated presses, but with the addition of an air cylinder to actuate the ram. All integrator presses are pneumatically operated.
Increase Operator Safety
Pryor Impact Preses are ideal for medium output and help to reduce worker exhaustion associated with hand and hammer marking tools. Presses are easy and safe to use on either regular or irregular workpieces. Bench-mounted presses have a large T-slotted worktable to enable easy fitting of workholding fixtures.
Pneumatic Operation Presses
Pneumatic presses (PB models) are supplied with a foot actuation pedal and some pipework, simply attach to an on-site air cylinder of compressor.
A detachable hand lever also gives the option of manual operation if required. Actuation by foot pedal makes the Press less physically demanding on the operator compared to a Hand Operated Press.
Pneumatic presses are supplied unguarded and it is the responsibility of the end user to supply and fit guarding to conform to local Health & Safety regulations.
Integrator Presses
Integrator Presses (PCR models) are compact and versatile and the ideal solution for fitting into automated production lines and machines. The PF flange mounting design has the benefit of a removable hand lever for manual operation, if required, plus the air cylinder to actuate the ram.
The PCR centre ram design consists of a co-axial module and provides the maximum power in the smallest space. The unit can be mounted in any direction using the four mounting holes.
Securely fix to a supporting structure in relation to the item to be marked. During installation, the operator must ensure the unit is not subjected to vibration or movement.
Maximum Force Output Guide | 114M/PB/PCR | 115M/PB/PCR | 116M/PB/PCR |
Hand Operated Benchtop Press (M Models) | 0 - 500 Kg | 0 - 3000 Kg | 0 - 6500 Kg |
Pneumatically Powered Benchtop Press (PB Models) | 0 - 600 Kg | 0 - 3500 Kg | 0 - 7500 Kg |
Powered Integrator Presses - Center Ram Series (PCR Models) | 0 - 600 Kg | 0 - 3500 Kg | 0 - 7500 Kg |
Press Shanks
Pryor Press Shanks are available in a variety of diameters and lengths to suit a range of Press models. All shank dimensions exclude the thread which are all M12 to suit Pryor’s range of Press marking tools.
All M12 threaded to suit Pryor Interchangeable Steel Type Holders, Manual Numberer, Automatic Numbering Head or custom engraved Flymark.
Key Points
- Removes worker exhaustion
- Manually or pneumatically operated
- Bench-mounted or integrated
- T-Slots enable fitting of workholding fixtures
- Marking force easily adjusted for marking different materials
- Daylight easily adjusted for marking different shaped components
Overview
Product Demonstration Video: Serial Number Marking with an 115M Impact Press and Auto Numbering Head
Overview
Impact Press Technical Information
Pneumatic presses are supplied unguarded and it is the responsibility of the end user to supply and fit guarding to conform to the Health & Safety At Work Act. Please note, however, that we need a Letter of Intent stating that guarding will be fitted by the end user to conform to the act before we can release pneumatics from our factory.
Pneumatic presses are supplied with a foot actuation pedal and some pipework.
Daylight easily adjustable with simple alan key tooling.
When ordering characters to match a set that you already have, take the character size measurement from the 'crown' of the character i.e. the most raised point.
Bench-mounted Hand-operated Press:
Marking capacity |
0 – 500Kg |
0 – 3000 Kg |
0 – 6500Kg |
Press Dimensions |
|
|
|
Base Area |
132 x 210 mm |
205 x 309 mm |
280 x 443 mm |
Overall Height |
450 mm |
650mm |
850 mm |
Daylight |
260 mm |
430mm |
390 mm |
Weight |
10 Kgs |
33 Kgs |
99Kgs |
Marking Table |
|||
Area |
100 x 100 mm |
160 x 160mm |
220 x 220 mm |
T-shaped slot |
6mm |
8mm |
12mm |
Marking Stroke |
|||
Rack stroke length |
30mm |
60mm |
100 mm |
Tool support stroke length |
8mm |
18mm |
22 mm |
Usable stroke length |
22mm |
42mm |
78 mm |
Machine Shank |
HMS060 Round Shank 6 |
HMS100 Round Shank |
HMS160 Round Shank |
Bench-mounted Pneumatic Press:
Marking capacity |
0 – 600Kg |
0 – 3500 Kg |
0 – 7500Kg |
Press Dimensions |
|
|
|
Base Area |
138 x 225 mm |
208 x 355 mm |
300 x 505 mm |
Overall Height |
350 mm |
600 mm |
840 mm |
Daylight Adjustment |
0 - 175 mm |
0 - 270 mm |
0 - 300 mm |
Weight |
14.5 Kgs |
53 Kgs |
162Kgs |
Marking Table |
|||
Area |
110 x 110 mm |
166 x 176 mm |
240 x 240 mm |
T-shaped slot |
6mm |
10mm |
12mm |
Marking Stroke |
|||
Rack stroke length |
30mm |
60mm |
85 mm |
Tool support stroke length |
8mm |
18mm |
22 mm |
Usable stroke length |
22mm |
42mm |
63 mm |
Machine Shank |
HMS080 Round Shank |
HMS100 Round Shank |
HMS160 Round Shank |
Air Pressure |
4 bar |
6 bar |
6 bar |
Air Connection |
1/8" B.S.P. |
1/4" B.S.P. |
1/4" B.S.P. |
Integrator Press:
Marking Capacity |
0 – 600Kg |
0 – 3500 Kg |
0 – 7500Kg |
Weight |
2Kg |
10Kg |
38Kg |
Air Pressure |
4 bars |
6 bars |
6 bars |
Air Consumption |
0.5L |
2.3L |
5.4L |
Shank |
HMS080 8mm dia. x 32mm |
HMS100 10mm dia. x 40mm |
HMS160 16mm dia. x 50mm |
Rack Stroke Length |
32mm |
67mm |
110mm |
Tool Support Stroke Length |
8mm |
18mm |
25mm |
Usable Stroke length |
24mm |
49mm |
85mm |