Low Stress Steel Type

Pryor Home
›
Products
›
Low Stress Steel Type

Steel Type for use in applications which dictate that lower stress levels are introduced into the component being marked. This is usually a requirement for Aerospace, Nuclear, Oil and Gas installations and some M.O.D. work.

2 Styles of Lowstress engraving available

Ministress - round faced character which gives a continuous line character when marked.

Dotstress - for even greater reduced stress levels, a character with similar nose formation to Ministress but with the added benefit of impressing the character in dot formation.

Available in:-

2 Character heights
Packs of individual characters
Set of 26 characters A-Z
Set of 10 characters 0-9
Set of 100 alpha-numeric and puncuation characters according to the most common use plus spacer pieces for non-marking positions and Hand Holder

Steel Type Holders to work with are available to purchase seperately

Download Brochure

View Detailed Product Information View Detailed Product Information

This product is not currently available to purchase online. Please send an enquiry to our team and we will let you know how to purchase.

Engraving Style

Pack Qty

Character Height

To work with Character Size

Character

Character Size

Character Height

To work with Character Size

Character

Features
Technical Data
Accessories

Overview

Making a mark with Steel Type Sets saves time - in just one stroke, a series of letters and figures can be indented with uniform legibility.

The basis of Lowstress marking type is that the character crown, instead of being sharp faced, is rounded to give a 'softer' impression into the component. This helps to eliminate any stress concentration at the bottom of the indent.

Nickel plated pieces with uniformity of character position and depth from one piece to another allows a quick, straight, consistent quality mark to be made on a range of materials including metal and plastic up to a maximum hardness of 37 Rockwell C

The Hand Holder comes complete with Allen key to secure the Steel Type in place. Simply adjust the grub screw for quick inscription change. Steel Type Holders to work with are available to purchase seperately, check the Holder Compatability & Capacity Chart in Technical Data for options available.

Manufactured under stringent BS EN ISO 9001:2008 quality controls and exacting standards.

Safety note: As with all striking tools, we recommend the use of appropriate safety protection. Safety glasses and gloves should we worn at all times

Key Points

Produced from the best steel grades for long life.
Precision ground blanks to give clear marks of consistent depth.
Hardened and tempered to precise limits to ensure consistency, durability and safety in use.
Type Holders designed to provide accurate Type location and positive locking.
Nickel plated finish to resist rust and offer a good quality appearance.

Overview

LOWSTRESS TYPE Blank Sizes - to be used in connection with the Type Diagram in the images ribbon.

(H) Character Height		(C) Blank Length		(B) North/South		(A) East/West
mm	inch	mm	inch	mm	inch	mm	inch
3.0mm	1/8"	22.20mm	7/8"	6.40mm	1/4"	4.80mm	3/16"
5.0mm	3/16"	19.05mm	3/4"	9.50mm	3/8"	6.40mm	1/4"

Type Holder Capacity

Character Height		Holder Reference / Capacity - number of pieces - single row
mm	inch	H6.35-29	H6.35-39	C02012Q Body	C02012R Body	H9.6-40
3.0mm	1/8"	6	8	14	2 rows of 8	-
5.0mm	3/16"	-	-	-	-	6

Hand Holder included in 100 piece composition set

Character Height	Holder Capacity - number of pieces - single row	Maximum length of marked inscription
3.0mm (1/8")	8 (H6.35-39)	39mm
5.0mm (3/16")	6 (H9.6-40)	40mm

Safety Grips

1 of 1 Filtered Products

Accessibility Links

Low Stress Steel Type