|
Pryor Marking Technology offers a sub-contract part marking service for its complete range of equipment. The contract marking service is aimed at anyone who has specific marking requirements for either components or finished items, and builds on Pryor's proven expertise in marking and traceability technology.
Pryor has a dedicated team to provide a fast, reliable, low cost, high value service to allow customers to outsource their marking process. Users of the outsourced marking service will be able to have components or parts marked to the relevant standard for their industry.
Additionally Pryor offer an outsourcing service for reading and verification of parts and components to most international standards. Additionally, Pryor can mark, verify, and read to most company specific standards for the global aerospace, automotive and medical companies.
Advantages
No capital outlay. Pryor have a full range of marking machines and vision equipment including lasers, pin marking, scribe marking, chemical etching, manual marking machines and presses, and verification / reading equipment .
Speed of turnaround. We realise that you need a fast turnaround to meet your supply chain requirements and we pride ourselves on an efficient marking service for you parts.
Quality of Mark. Both quality and consistency of mark are provided by our experienced team and our in depth knowledge of all marking methods. Our internal controls and quality systems ensure accuracy of your mark in terms of depth, size, text, and placement.
No training of personnel. We have the experienced team in marking and verification so you do not have to.
Cost effective. Outsourced part marking / verification turns your marking process into a variable cost for your organisation
Certifications Reliance upon Pryor's certifications AS9132, SJAC9132, EN9132, IAQG9132, AIM DPM, MIL-STD-129P, MIL-STD-130M MIL-STD-130N, JES131, 981-160-063, ISO/IEC15415 & ISO/IEC154246. ISO/IEC15434, ISO/IEC16022 IUID,SPEC2000, and DOD compliant for part marking reading and verification
Equipment Proving. Allows a 'try before you buy' approach to purchasing of Pryor marking and vision equipment
Introduction of New Processes Quick and easy way to introduce 2D Data Matrix codes / IUID part traceability into your organisation. 2D Data Matrix solutions utilise a range of marking and vision technologies to direct part mark and decode 2D Datamatrix codes. We can offer pin marking, laser marking, scribe marking, electro chemical etching and offer a wide range of vision equipment.
No minimum quantity. If you need only 2 pieces marking, we will mark only 2 pieces
Independent Verification Reports. Pryor can provide independent verification compliance certificates for each of your parts.
Quality Systems Contract Part Marking to ISO9001:2000
Methods of Marking & Traceability Available
Pryor has a full range of marking and traceability equipment and will work with you to find the ideal method of marking your parts and components. The method of marking will be determined by design/customer specifications, the nature of the material being marked, its commercial value, and how, when and where the mark is going to be used later in the item's life.
|
|
Laser marking - This is the ideal solution for organisations requiring fixed or variable marking onto a range of materials. It is a high speed accurate method of marking, in which company logos and a high level of pictorial details can be reproduced on to the component. It can produce traditional 1D bar codes and 2D data matrix codes. Its marks are both manually readable and machine readable. Ideal for marking labels and ID plates, medal marking, marking of promotional gifts, electronic component marking, marking of medical instruments, implants prostheses and surgical tools, turbine blade marking, cutting tool marking, PCB marking. Marking on steel, aluminum, titanium, brass, copper, glass and wood |
|
|
Indent Stamp Marking - Fast & reliable indentation methods can be used to provide automatic serialising and marking of constant alpha-numerical characters and logos.
|
|
|
Dot Peen Marking - Is ideal for nearly every industrial component in the aerospace, automotive, medical and general engineering industry. The dot mark arrangement makes it ideal for 2D data matrix codes. It is also used where variable codes such as date stamps, batch codes and serial number marking are required. It is useful for parts where laser marks are prohibited such as certain aerospace components. Its marks can be both manually readable and machine readable. This method is ideal for small and large quantities. |
|
|
Electro-chemical etching - This is the chemical etching of components used for alpha numeric, symbols or Data Matrix marking. Often used where laser marking is prohibited within the industry and damage may be caused by dot peen marking. Generally useful for lower batch sizes. Used for marking ID plates and lables, medical instruments marking, implants prostheses and surgical tools, turbine marking, cutting tool marking. Marking on steel, aluminum, titanium, brass, copper and glass. Its marks can be both readable manually and readable by vision equipment.
|
Flexible solution
The Pryor sub contracting team can offer its marking and verification service at the head office in Sheffield or at the clients premises. The team has access to a wide range of equipment and portable marking methods. For example, one health authority in the Midlands wanted to mark all surgical instruments used throughout its operating theatres. This was an extra measure taken as part of a comprehensive programme to alleviate cross contamination and infection; and enables the hospital to track which instruments have been used in which theatres and for which operations. Each instrument bears its own unique inscription that can be read time and time again and also withstand the rigours of a thorough sterilisation process after each period of use. Rather than remove all the items from the hospital, Pryor was able to take portable marking equipment with them to the site and the marking was done on the hospital premises.
Full Component Traceability
More and more engineering and manufacturing organisations are recognising the value of IUID (Item Unique IDentification) and part traceability as part of their own drive towards better quality and a more sophisticated approach to the management of processes and production. Many organisations cannot always justify the financial outlay for marking and verification equipment so now they can come to Pryor to fulfill all their marking and vision requirements. Pryor has many years experience in part traceability in the automotive, aerospace and medical industry and many of these techniques can be applied equally to other areas of engineering and manufacturing.
For more information about Outsourcing Part Marking please contact us
|
Sub Contract Services
