Manual and Pneumatic free standing roll marking presses. The main slide load and position are adjustable and the marking carriage slide is adjustable on both machines for speed as well as stroke length. Why Roll Marking? Roll Marking has several advantages over press marking in that it is possible to mark both flat and round workpieces. Because only a small part of the component is marked at any one time, marking pressure is much lower than straight press marking. This results in less effort, reduced distortion in the component and the ability to mark thin, delicate or uneven components.   Pryormark 34   Manually operated floor standing machine with a maximum marking load of 2000kg without pedal table lift, hand lever carriage stroke control and has no need for any form of guarding. The unit is a general purpose machine for small and medium production runs where low set-up times are of importance. Marking Stroke   Stroke length 115 mm max.   Speed Up to 1000 / hour Physical Characteristics   Footprint area 560 x 410 mm   Overall Height 1370 mm   Weight 216 Kg   Daylight (without tooling) 343 mm   Throat (from table centre) 177 mm   Paint Finish Green RAL 6011 Marking Table   Area 185 x 215 mm   Table Thrust Up to 1750 Kg   Table Lift 12 mm max. click to enlarge   Pryormark 35     Air operated general application roll marking machine capable of producing clean sharp marks with an even depth of indentation. It combines the benefits of roll marking with improved performance and innovative design features, good marking becomes a simple operation for unskilled operators with this machine. With a simple yet robust construction, the machine has a stress relieved frame to provide maximum rigidity in use. The head, made from spheroidal graphite iron, is fitted with an easily accessible stroke adjuster. The carriage slide is supported by replaceable hardened slideways and needle bearing strips. Trunnion mounted cylinders and powered table lift facilitate an even depth of impression. Marking Stroke   Stroke length 5 - 125 mm   Speed Up to 1200 / hour Physical Characteristics   Footprint area 335 x 990 mm   Overall Height 1500 mm   Weight 400 Kg (approx)   Daylight (without tooling) 400 mm   Throat (from table centre) 175 mm   Paint Finish Green RAL 6011 Marking Table   Area 185 x 215 mm   Table Thrust 250 -2000 Kg   Table Lift 14 mm max. click to enlarge

Features Floor standing variable load roll marking machines   Manual press load to 1750 kg   Pneumatic press load to 2000 kg   Guarding not required on Pryormark 34   Wide range of fixturing available to suit most workpieces.   Comprehensive 12 months parts & labour warranty   Supplied with operating & maintenance manual Accessories Wedge Type & Rotary Holders Roll Marking Dies Flat Type Holders Anvil Fixtures Geared Roll Carriers & Rotary Holders Twin Roller Fixtures Five Roller Fixture Mandrel Fixtures Where to buy Direct from Pryor Worldwide Distributors Product Literature (PDF Format) None Currently Available