Pneumatically powered bench mounted percussion presses work on the same principles as our manual bench presses but with the addition of an air cylinder to actuate the ram. Marking is achieved by compressing and releasing a spring loaded ram; spring compression (and therefore marking load) can be easily and quickly adjusted. Removable hand lever allows easy setting and manual operation. Pryormark 114PB (0-600kg)   Variable Marking Load up to 600kg. Physical Characteristics   Base Area 225 x 140 mm   Overall Height 375 mm   Daylight 175 mm   Weight 14.5 Kg Marking Table   Area 110 x 110 mm   T-shaped slot 6 mm Marking Stroke   Aire Pressure Required 4-5 bar   Shank 6x30mm / 8x32mm   Rack stroke length 22 mm   Tool support stroke length 8 mm   Usable stroke length 14 mm click to enlarge   Pryormark 115PB (0-3000kg)     Variable Marking Load up to 3000kg. Physical Characteristics   Base Area 358 x 208 mm   Overall Height 630 mm   Daylight 265 mm   Weight 53 Kg Marking Table   Area 170 x 170 mm   T-shaped slot 8 mm Marking Stroke   Air Pressure Required 6-9 bar   Shank 10 x 38 mm   Rack stroke length 60 mm   Tool support stroke length 18 mm   Usable stroke length 42 mm click to enlarge   Pryormark 116PB (0-6000kg)     Variable Marking Load up to 6000kg. Physical Characteristics   Base Area 510 x 295 mm   Overall Height 840 mm   Daylight 300 mm   Weight 162 Kg Marking Table   Area 240 x 240 mm   T-shaped slot 12 mm Marking Stroke   Air Pressure Required 6-11 bar   Shank 16 x 48 mm   Rack stroke length 80 mm   Tool support stroke length 22 mm   Usable stroke length 58 mm click to enlarge

Features Available in three marking loads, 600kg, 3500kg and 7500 kg.   Adjustable power from 0 to maximum.   Removable handle allows manual operation.   Comprehensive 12 months parts & labour warranty   Supplied with operating & maintenance manual Accessories Type & Type Holders Numbering Heads Press Marking Dies Where to buy Direct from Pryor Worldwide Distributors Product Literature (PDF Format) Press Range