Manual & Press Marking Products
SMALL BUT POWERFUL
- Compact and robust
- A clean dry air supply is all that is needed
- Constant production output interrupted only by minimal routine maintenance
- Machines can simply adjusted and serviced using normal tools
- Running costs are kept to a minimum
|
VERSATILE
- Can operate in normal upright position, horizontally or in any attitude
- Press load easily adjusted by regulating air supply
- Loads down to approximately 10% of maximum without significant loss of ram speed
|
| Pryormark™ 2M4000 | Pryormark™ 2M10000 | Pryormark™ 2M25000 |
| SAFETY is a prime consideration and different guarding options, to conform to International Safety Standards, can be fitted. |
 |
 |
 |
| Variable Marking Load |
up to 4,000 Kgs |
up to 10,000 Kgs |
up to 25,000 Kgs |
|
| SOFT ALUMINIUM |
Maximum number of characters |
| 1.5mm |
80 |
200 |
500 |
| 2.5mm |
48 |
120 |
300 |
| 3.0mm |
40 |
100 |
250 |
| 5.0mm |
24 |
60 |
150 |
|
| BRIGHT MILD STEEL |
|
| 1.5mm |
20 |
50 |
125 |
| 2.5mm |
12 |
30 |
75 |
| 3.0mm |
10 |
25 |
62 |
| 5.0mm |
6 |
15 |
37 |
|
| 18/8 STAINLESS STEEL |
|
| 1.5mm |
10 |
25 |
62 |
| 2.5mm |
6 |
15 |
37 |
| 3.0mm |
5 |
12 |
31 |
| 5.0mm |
3 |
7 |
18 |
|
| Physical Characteristics |
|
|
|
| BaseArea |
190 x 355 mm |
270 x 520 mm |
290 x 580 mm |
| Overall Height |
730 mm |
970 mm |
970 mm |
| Daylight |
60 - 160 mm |
175 mm |
175 mm |
| Throat from ram centre) |
85 mm |
115 mm |
115 mm |
| Weight |
57 Kgs |
185 Kgs |
285 Kgs |
|
| Marking Table |
|
|
|
| Area |
150 x 150mm |
230 x 220 mm |
280 x 220 mm |
|
| Marking Stroke |
|
|
|
| Air Pressure Required |
5.5 bar |
5.5 bar |
5.5 bar |
| Maximum Air Pressure |
7 bar |
7 bar |
7 bar |
| Ram |
40mm dia. bored for 20mm dia. x 25mm shank HMS2025 |
Standard 70° Dovetail with presetting stop |
Standard 70° Dovetail with presetting stop |
| Rack stroke length |
6mm max |
50mm total with 4.5mm Power Stroke available at any point |
50mm total with 4.5mm Power Stroke available at any point |
| Operating Speed |
Up to 2,000 strokes per hour |
Up to 1,000 strokes per hour |
Up to 1,000 strokes per hour |
Maximum number of characters are for guidance only - Pryor will be pleased to offer specific recommendations on Press capacity needed once full details of application are received
The above maxima are based on an average depth of 0.1mm in a bright finish. More characters can be marked if less depth is acceptable.
Accessories
 |
ideal for random and frequent changing inscriptions
|
 |
for Trademarks, Designs and other constant information
|
 |
ideal for random changing inscriptions and batch marking
|
 |
ideal for consecutive serial numbering
|
Special Tooling and Fixturing
Guards
Standard fixed guard around machine table Pull-down guard to actuate machine cycle
Workpiece Handling-Push/Pull Slide
To transfer workpiece in and out of guarded area.
Auto Feed Fixture transfers vertically stacked workpieces one at a time to Marking fixture and then eject via chute
Actuation-Operating Valves
Push button, pedal valve, or roller operated valve. Remote operation by pneumatic pilot value or electrical solenoid
Workpiece counting including automatic machine shut-off on Completion of batch
Fully Automatic Feed Systems
Including bowl feed, pick and place units, robots etc
Downloadable Brochure
|
